https://www.sstechnomed.in Latest Products Fri, 13 Mar 2026 15:24:15 +0530 en-us https://www.sstechnomed.in https://www.sstechnomed.in/tiana-nw-infant-radiant-warmer.htm https://www.sstechnomed.in/tiana-nw-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product DescriptionManual Mode Facility of converting the warmer from servo mode to manual mode for non-stop working. The heat in the manual mode is locked at 50% to give more protection for the baby. Heater Assembly The Heater assembly located above the center of the support structure consists of radiant heater and reflector with inbuilt halogen examination lamp for assessment of Infant color. The heater can be swivelled to either direction. Baby Bed The attached spacious baby bed incorporates easy drop down glasses for maximum access to the patient. Castors The system is fitted with 2″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors. Technical Specification Height1920mm Length890mm Width860mm Power Supply220V/50Hz Heater Power650 Watts Fuse5 Amp OPTIONAL 2 Trays below the baby bed for keeping consumables. 2 Drawers fitted below the baby bed. https://www.sstechnomed.in/tiana-s-infant-radiant-warmer.htm https://www.sstechnomed.in/tiana-s-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Control Panel The TianaTM – S Infant Radiant Warmer  comes complete with automatic manual /baby (Servo)/Air modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of : • High Temp./ Low Temp.  •  System Fail  • Probe Failure  •  Power Failure  • Timer  •  Heater fail / ON (Optional) only  visual alarm provided Heater Assembly The Parabolic heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either direction for taking X-ray and doing procedures. Air Mode (Optional) The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event. Manual Mode  The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit. Baby Bed The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing. Additional Features If needed the unit can be programmed by the user itself for any of the following features: (a) Count Up / down Timer. (b) Check baby Alarm. (c)  Pre warming mode. Castors The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors. Optional : The system comes with check baby alarm ( 1 – 120min.) Technical Specification   Height 1850mm Length 1050mm Width 650mm Power Supply 220V/50Hz Heater Power 650 Watts Fuse 5 Amp https://www.sstechnomed.in/silicon-ambu-bag.htm https://www.sstechnomed.in/silicon-ambu-bag.htm Mon, 30 Jun 2025 00:00:00 +0530 Our company is ranked amongst the distinguished Manufacturers and Exporters of Ambu Bag from Uttar Pradesh, India. The Ambu Bag offered by us is fabricated in our fully equipped facility and in adherence to set industrial parameters. We are capable of delivering small or bulk orders of Ambu Bag. We are offering Ambu Bag to our valued buyers’ across the world at most minimal rates.   Details : Rugged 100% Autoclavable Reusable 500ml Silicone below Non Rebreathing valve with 40cm of H2O pressure release Mask size - No. 01 PVC Oxygen Reservoir & oxygen tubing. https://www.sstechnomed.in/inc-trp-transport-incubator.htm https://www.sstechnomed.in/inc-trp-transport-incubator.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Alarms • Skin temp  low / high   • Probe failure    • Low battery   • Power failure  • System Failure   • Timer In case of high temperature i.e. above 380C, heater automatically cuts off thus ensuring baby’s safety. Can be used on manual mode as well.   Collapsible Stainless Steel Stand With 2/4 no. gas springs for ambulance and in hospital transport purposes. Gas spring system allow the stand to collapse when the lever is pulled and trolley is pressed from both the sides.   Temperature set range 32 °C-  39 °C Temp variability 1.0 °C Temp uniformity 1.0 °C Air filter removes airborne particles & dust   Easy  Access Quick and easy access through the side access door and front port holes. The side door folds down and the matteress retracts out  from the hood to access for  emergency procedures. The door and tubing ports  offer ventilator tubing support .Infant restraint strap attached to the baby bed.   Power Source Transport incubator  operates on AC or DC power using AC when available or switching to its internal battery when necessary Battery : The batteries used in the system are 12 volt 18ah. Sealed maintenance free VRLA batteries. Charge Time : 8-10 hrs. per battery from full discharge. Hood options : Standard single wall / double wall hood (on demand). Chassis Body : Plastic (fibre) to shock proof the system   Standard Features • Single wall Hood  • Skin temperature probe / Air temp. Probe   • 2 access doors   •  1 baby belt  • Collapsible trolley   Optional • Examination lamp  • 2 disposable infant restraint straps  • 1 iris port   • 6 tubing ports  • Accessory shelf  • Suction, Oxygen cylinder, pressure regulatory assembly, Flow Meter, Remote Controlled movement of the Trolley.   Control Displays Battery condition status single led indication of low battery condition on the side panel Power mode illuminates AC, DC or external DC Air/Baby temp °C displays incubator air temp / baby temperature     Dimensions in inches (Approx.) Height without hood 39″ In collapsible stand mode  29″ height with hood 49″ Width 23″ Length 53″ Baby bed 20×11″ Weight 75kg Backup 60-90mns Size of Castors 5″ PU Sealed maintenance free batter VRLA Batteries Charge time : 10hrs.(Approx.) https://www.sstechnomed.in/tiana-dxe-infant-radiant-warmer.htm https://www.sstechnomed.in/tiana-dxe-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Control Panel The TianaTm– DX(E) Infant Radiant Warmer comes with automatic manual and baby (Servo) modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:   High Temp./ Low Temp.  Power Failure System Fail Timer Probe Failure Heater fail /ON (Optional) only visual alarm provided   Air Mode (Optional) The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event   Manual Mode The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.   Baby Bed The spacious oval baby bed incorporates easy drop down/fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed fortaking X-ray of the baby without disturbing   The First Breath The Tiana – DX(E) Infant Radiant Warmer combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed.   Castors The system is fitted with 4″ high quality castors having brakes in front 2 castors. Optional : Antistatic castors   Tray The unit comes Two trays below baby bed for keeping consumables.   Phototherapy Unit (Optional) The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit.   Additional Features If needed the unit can be programmed by the user himself for any of the following features: (A) Count Up / down Timer. (B) Check baby Alarm. (C) Pre warming mode. https://www.sstechnomed.in/irw-1723-infant-radiant-warmer.htm https://www.sstechnomed.in/irw-1723-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Manual Mode Facility of converting the warmer from servo mode to manual mode for non-stop working. The heat in the manual mode is locked at 50% to give more protection for the baby.   Heater Assembly The Heater assembly located above the center of the support structure consists of radiant heater and reflector with inbuilt LED examination lamp for assessment of Infant color. The heater can be swiveled to either direction.   Baby Bed The attached spacious baby bed incorporates easy drop down glasses for maximum access to the patient.     Castors The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.   Dimensions (Approx.) Height- 1920mm x Length- 890mm x Width- 860mm   Electrical Specifications Power Supply: 220V/50Hz Heater Power: 650 Watts Fuse: 5 Amp   Storage The unit comes fitted with one drawer system which slides out for keeping consumables. https://www.sstechnomed.in/tiana-d2-open-care-system.htm https://www.sstechnomed.in/tiana-d2-open-care-system.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION\\nControl PanelThe TianaTM – D 2 open care system comes with automatic manual and baby (Servo) modes. Big separate display for both skin and air temperature. Display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of:\\n\\nHigh Temp./ Low Temp.        • Power Failure             • System Fail              •   Timer -On\\nProbe Failure             • Heater fail/ON (Optional) only visual alarm provided\\n\\nHeater AssemblyThe heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica/ Quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures. The Heater is also equipped with LED Phototherapy on both side to provide light intensity effective on the baby bed\\nAir Mode (Optional)The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event.\\nManual ModeThe system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.\\nBaby BedThe spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing\\nLed PhototherapyTiana D comes with choice of highly efficient and bright 12/15 choice of LEDs on each side of the heater. The strong lux of 24/30 LEDs cure jaundice in baby rapidly.\\nInfant ResuscitatorThe range of flow adjustment is 5LPM–15LPM.The MAX-P and PIP are safe, controlled and accurate. The PEEP is constant and accurate.\\n\\nSimple operation and flexible application.\\n\\nInbuilt PrinterManual printer fitted in the unit gives you real time printout of the event when required by pressing the switch on the control unit.\\nOptional• Resuscitator • Suction • Oxygen\\nTechnical Specification\\n \\n\\n\\n\\nHeight\\n1850mm\\n\\n\\nLength\\n1050mm\\n\\n\\nWidth\\n650mm\\n\\n\\nPower Supply\\n220V/50Hz\\n\\n\\nHeater Power\\n650 Watts\\n\\n\\nFuse\\n5 Amp\\n\\n\\n\\n \\nIf needed the unit can be programmed by the user itself for any of the following features:(a) Count Up / down Timer.(b) Check baby Alarm. (OPTIONAL).(C) Pre warming mode https://www.sstechnomed.in/led-single-surface-sunshine-phototherapy-unit.htm https://www.sstechnomed.in/led-single-surface-sunshine-phototherapy-unit.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION \\n This has been achieved by exposing the infant to bright light (approximately 4.5 micro watts/sq cm/nm) in the range of 420-480 nm wave length by use of conventional phototherapy unit has been one of SS TECHNOMED most important focus in the field of neonatalogy for many order to remove the limitation of fluorescent  and CFL tubes, SS TECHNOMED has utilised long lasting, durable, more efficient and cost effective LEDs with more than double the flux as against what is radiated from conventional, fluorescent and CFL, for jaundice treatment. \\n Parameter \\n \\n LED 9-12 hi power LEDs(blue)(white LED optional) \\n Irradiance >42 mw/cm2/nm at 30cm \\n Light source lifetime minimum 25,000hrs. \\n Less than 10% change in illumination after 25,000hrs(irradiance) \\n Wavelength 420-480 nm \\n Variation in intensity for 6 hours<10% \\n Effective area 50 cm X 30 cm. \\n \\n ElectricalInput voltage 100-240 V, 50-60Hz \\n Technical Specification \\n   \\n \\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n Front 18” (L)x 10” (w) x3”(H) Height (adjustable) Min 1230 mm, Max 1600mm Length 800mm Width 720mm Backside 18” x 8.5” x 3” https://www.sstechnomed.in/led-double-surface-sunshine-phototherapy-unit.htm https://www.sstechnomed.in/led-double-surface-sunshine-phototherapy-unit.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION \\n This has been achieved by exposing the infant to bright light (approximately 4.5 micro watts/sq cm/nm) in the range of 420-480 nm wave length by use of conventional phototherapy unit has been one of SS TECHNOMED most important focus in the field of neonatology for many years. In order to remove the limitation of fluorescent and CFL tubes, SS TECHNOMED has utilized long lasting, durable, more efficient and cost effective LEDs with more than double the flux as against what is radiated from conventional, fluorescent and CFL, for jaundice treatment. \\n Parameter \\n \\n LED 9-12 hi power LEDs(blue) (white LED optional) \\n Irradiance >42 mw/cm2/nm at 30cm \\n Light source lifetime minimum 25,000hrs. \\n Less than 10% change in illumination after 25,000hrs (irradiance) \\n Wavelength 420-480 nm \\n Variation in intensity for 6 hours<10% \\n Effective area 50 cm X 30 cm \\n \\n ElectricalInput voltage 100-240 V, 50-60Hz \\n Dimensions \\n   \\n \\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n Front 18” (L)x 8.5” (w) x3”(H) Height (adjustable) Min : 1230 mm Max : 1600mm Length 800mm Width 720mm \\n   \\n Baby Bassinet \\n \\n Clear Collapsible fold down side panels \\n Baby Tray with Transparent base for Undersurface Phototherapy usage. \\n Lower Shelf \\n Movable Castors \\n Undersurface LED Phototherapy \\n Same as over head placed under the bassinet. \\n \\n Double Surface Phototherapy Unit \\n \\n It is a combination of overhead phototherapy Unit and undersurface Phototherapy with Baby Bassinet. \\n \\n Optional \\n \\n LCD Digital Timer for lamp usage hours and patient exposure. \\n https://www.sstechnomed.in/medical-oxygen-hood.htm https://www.sstechnomed.in/medical-oxygen-hood.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description We make sure that the quality of the raw materials is of par excellence so that the finished goods will be faultless. Thus, we source the inputs only from trusted vendors. Thanks to our immense expertise of the domain, we as a Supplier, strives to deliver nothing short of excellence to our customers. Specification : Single piece Polycarbonate & silicon adjustable oxygen hood https://www.sstechnomed.in/electric-vein-detector.htm https://www.sstechnomed.in/electric-vein-detector.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION Thus-by reducing the risk of puncturing the body many a times, while giving the IV or an injection or collecting a blood sample. In all the cases the patient or the user is happier because it reduces the risk of injecting the veins falsely. The safest LEDs which do not have the UV or infrared radiation are used for this purpose. Vein Trace could be used to map the veins all along the limbs without any difficulty. The specific wavelength RED LEDs used emits the light and thus the veins are clearly visible to the naked eye. Specifications Number of RED LEDs : 6 8 volts rechargeable battery pack. Charger for charging the device operating voltage: universal. Dimensions: 50 x 16 x 160 mm Weight: 120 grams User manual:Please follow the instruction as follows See whether the charge is full by switching on the unit (never look into the Light source directly). If fully charged place the Vein Trace on the arm or limb as per the convenience and just push along the skin to trace the veins very easily. The optional holding band supports the user hand to use it comfortably. The “U” shaped gap is where the vein is to be traced. And thus the syringe is to be pushed into the vein without many trials. There are no clinically proven side affects with the Vein Trace and the LED. But general precautions are to be taken while using the same. Never look into the LEDs (light source) directly Do no operate the unit continuously for more than 5 minutes Switch off the unit whenever not in use. Charge the unit for 3 hours before first use. Remove the charger from the mains always to save the power Never connect to the charger and used the Vein Trace as it could lead to accidents. Do not clean the transparent protective cover on the LED with any kind of solvents or strong detergents. Wipe it with soft and damp cloth only. https://www.sstechnomed.in/shi-17-air-oxygen-blender.htm https://www.sstechnomed.in/shi-17-air-oxygen-blender.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Newborn / premature baby special equipment: It is a sort of equipment used by medical staff who make rescue measures by using different concentration of oxygen, suitable for neonate especially premature infant to treat the oxygen damage and other complications, such as retinopathy of premature children(ROP), and chronic lung disease(CLD) due to absorbing high flow and concentrations oxygen for a long time. The product complies with requirements of the “Guide”. It must use the device that mixed with air and oxygen, strictly gasp the indications and ways of using oxygen, monitor and adjust the concentration in time according to the condition of patients to avoid excessive fluctuation Product Performance Characteristics: It is used on the course that strictly requires for oxygen concentration, such as hood, nasal catheter, incubator, infant resuscitator, heart lung machine. The different concentrations of medical oxygen will be configured by adjusting the proportion of oxygen and air The surface is processing with anodic oxidation. Equipped with a regulating valve that can adjust the proportion of oxygen concentration, and a device that make the pressure stable, in order to output the constant pressure. Adjust the oxygen concentrations and flow respectively. The structure with double output port, it can supply gas for one or more patients at the same time. Inside an alarm system of differential pressure. When alarming, the safety valve starts automatically and produces the mixture gas continuously to ensure the safety of patients. Performance Parameters Model: (SHI-17) Oxygen concentration adjustment: 21% to 100% Flow regulation: 0 ~ 18LPM (optional dual flow meter dual output). https://www.sstechnomed.in/shi-23-air-oxygen-blender.htm https://www.sstechnomed.in/shi-23-air-oxygen-blender.htm Mon, 30 Jun 2025 00:00:00 +0530 Newborn / Premature Baby Special Equipment This equipment is designed for medical staff to perform rescue measures using various concentrations of oxygen, specifically for neonates, especially premature infants. It helps in treating oxygen damage and complications such as: Retinopathy of Prematurity (ROP) Chronic Lung Disease (CLD) These conditions may occur due to prolonged exposure to high-flow, high-concentration oxygen. The product complies with the relevant medical guidelines. It must be used with a device that mixes air and oxygen, while: Strictly following indications and methods of oxygen use Monitoring and adjusting oxygen concentration in real-time Avoiding excessive fluctuations in oxygen levels Product Performance Characteristics Suitable for procedures requiring precise oxygen concentration control, such as: Hood Nasal catheter Incubator Infant resuscitator Heart-lung machine Configures different concentrations of medical oxygen by adjusting the proportion of oxygen and air Surface treated with anodic oxidation for durability Regulating valve allows for adjustment of oxygen concentration Equipped with a pressure stabilizing device to ensure constant pressure output Separate control of oxygen concentration and flow Double output port structure, capable of supplying gas to one or more patients simultaneously Built-in differential pressure alarm system When triggered, the safety valve activates automatically Continues to produce mixed gas to ensure patient safety Performance Parameters   Model: SHI-23 Optional dual output configuration Oxygen concentration adjustment: 21% to 100% Optional attachments: Flow meter / Inhaler https://www.sstechnomed.in/shi-24-air-oxygen-blender.htm https://www.sstechnomed.in/shi-24-air-oxygen-blender.htm Mon, 30 Jun 2025 00:00:00 +0530 Newborn / Premature Baby Special Equipment This is a type of medical equipment used by healthcare professionals to perform rescue interventions using different concentrations of oxygen. It is particularly suitable for neonates, especially premature infants, in the treatment of oxygen-induced damage and complications such as: Retinopathy of Prematurity (ROP) Chronic Lung Disease (CLD) These conditions can occur due to prolonged exposure to high-flow and high-concentration oxygen. The product complies with the requirements of the medical “Guide”. It is essential to: Use a device that mixes air and oxygen Strictly follow the indications and methods of oxygen use Monitor and adjust the oxygen concentration in real-time according to the patient’s condition Avoid excessive fluctuations in oxygen levels Product Performance Characteristics Used in applications requiring precise oxygen concentration control, such as: Hood Nasal catheter Incubator Infant resuscitator Heart-lung machine Configures different oxygen concentrations by adjusting the oxygen-to-air ratio Surface treated with anodic oxidation for enhanced durability Equipped with: A regulating valve to adjust oxygen concentration A pressure stabilizing device to maintain constant pressure output Independent control of both oxygen concentration and flow rate Double output port structure, allowing gas supply to one or multiple patients simultaneously Integrated differential pressure alarm system When triggered, the safety valve activates automatically Continues producing mixed gas to ensure patient safety Performance Parameters Model: SHI-26 Oxygen concentration adjustment: 21% to 100% Flow rate options: 0.1 LPM ~ 1.0 LPM (dual output) 0.1 LPM ~ 10 LPM https://www.sstechnomed.in/shi-26-air-oxygen-blender.htm https://www.sstechnomed.in/shi-26-air-oxygen-blender.htm Mon, 30 Jun 2025 00:00:00 +0530 Newborn / Premature Baby Special Equipment This equipment is designed for medical personnel to carry out rescue measures using various concentrations of oxygen. It is particularly suitable for neonates, especially premature infants, to treat oxygen-related complications such as: Retinopathy of Prematurity (ROP) Chronic Lung Disease (CLD) These complications often result from prolonged exposure to high-flow and high-concentration oxygen. The product complies with the requirements of the “Guide”. It must be used in conjunction with a device that mixes air and oxygen, following the correct usage guidelines, and continuously: Monitoring and adjusting the oxygen concentration based on the patient’s condition Avoiding excessive fluctuation in oxygen delivery Product Performance Characteristics Used in procedures that require precise oxygen concentration, such as: Hood Nasal catheter Incubator Infant resuscitator Heart-lung machine Adjustable oxygen concentration by varying the proportion of oxygen and air Anodic oxidation-treated surface for enhanced durability Equipped with: A regulating valve to fine-tune oxygen concentration A pressure stabilizer to maintain constant output pressure Independent control of both oxygen concentration and flow rate Double output port structure, capable of supplying gas to one or more patients simultaneously Built-in differential pressure alarm system If triggered, the safety valve automatically activates Continuously produces mixed gas to ensure patient safety Performance Parameters Model: SHI-26 Oxygen concentration adjustment range: 21% to 100% Flow rate: 0.1 LPM to 1.0 LPM (dual output) 0.1 LPM to 10 LPM https://www.sstechnomed.in/restohealth-01-bubble-cpap-system.htm https://www.sstechnomed.in/restohealth-01-bubble-cpap-system.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description The Neonatal Continuous Positive Airway Pressure (Nasal-CPAP) Support System provides continuous positive airflow into the airway via a nasal or nasal congestion interface. Under spontaneous breathing conditions, the patient must have: A stable respiratory drive Adequate tidal volume The system imposes a constant positive airway pressure throughout the breathing cycle, which helps: Prevent airway collapse Increase functional residual capacity Improve lung compliance Enhance oxygenation This mode does not provide mechanical ventilation. It is specifically designed to support spontaneous breathing in newborns by maintaining continuous positive pressure ventilation. Product Superiority Provides the baby with safe and controllable oxygen concentration Effectively maintains functional residual capacity Helps reduce respiratory effort by the baby Reduces the need for invasive mechanical ventilation Supplies adequately humidified gas Significantly lowers the risk of Chronic Lung Disease (CLD) Improves lung physiological parameters, including height and weight CPAP Pressure Generator Easy adjustment of CPAP pressure from 3 to 250 px water column Automatic water level control mechanism to ensure constant CPAP pressure Removable water tank prevents therapy interruption Additional Features (Restrohealth–02) Equipped with inbuilt air-oxygen blender Compact and portable design with a built-in top handle Can be used as a transport CPAP when connected to power and oxygen supply New concept built-in air compressor – supports easy bubble CPAP Low power consumption designed for spontaneous breathing in newborns and children Small size, low noise, and maintenance-free, suitable for: NICU Patient transport Pediatric ward Other clinical environments Technical Specifications Ventilation Mode: CPAP (Bubble CPAP) Mode Scope of Application: Spontaneous breathing support for newborns through continuous positive pressure ventilation Flow Regulation (LPM): 0–10 LPM (Varies with different air-oxygen blenders) Oxygen Concentration (O₂%): 21% – 100% CPAP Pressure: 300 Pa – 1000 Pa (3 cm H₂O – 10 cm H₂O) Pressure Warning: Sound alarm (Pneumatic alarm) Indicator Light: Illuminated when the device is operational Working Noise: Not more than 55 dB(A) Gas Input: Medical oxygen, 0.3 MPa – 0.4 MPa Power Supply: AC 220V ± 22V, 50Hz ± 1Hz https://www.sstechnomed.in/restohealth-02-bubble-cpap-machine.htm https://www.sstechnomed.in/restohealth-02-bubble-cpap-machine.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION\\nNeonatal continuous positive airway pressure support system with nasal or nasal congestion CPAP (Nasal-CPAP) will continue to positive air flow into the airway CPAP ventilator. Refers to the spontaneous breathing conditions, the patient should have a stable respiratory drive force and the appropriate tidal volume, in the entire breathing cycle of artificial imposition of a certain degree of positive airway pressure, which is conducive to prevent airway collapse, increase the functional residual capacity , Improve lung compliance, and improve oxygenation. In this mode, the ventilator only maintains a certain positive airway pressure, without mechanical ventilation. For spontaneous breathing of the newborn, to provide continuous positive pressure ventilation support.\\nProduct Superiority:\\n\\nAble to give the baby a safe and controllable oxygen concentration.\\nIt is possible to effectively maintain the functional residual capacity.\\nCan help reduce the breathing done by the baby.\\nCan reduce the need for invasive mechanical ventilation.\\nAble to give the baby a better wet gas.\\nCan significantly reduce the incidence of chronic pneumonia (CLD).\\nCan improve some of the lung physiological indicators, such as height, weight and so on.\\n\\nCPAP pressure generator\\n\\nWith the CPAP pressure bar it is easy to set the shock pressure from 3 to 250px water column.\\nAutomatic water level adjustment mechanism to ensure constant CPAP pressure levels.\\nRemovable water tank can keep the CPAP from being interrupted.\\n\\nTechnical Specification\\n \\n\\n\\n\\nVentilation mode ( MODE)\\nCPAP (BUBBLE CPAP) mode.\\n\\n\\nThe scope of application\\nApplicable to spontaneous breathing of the newborn, to provide continuous positive pressure ventilation support.\\n\\n\\nFlow regulation LPM\\n0 LPM-1 0 LPM (Varies in different Air- Oxygen blender).\\n\\n\\nOxygen concentration O2%\\n21% -100%\\n\\n\\nCPAP pressure\\n300 Pa – 1000 Pa (3 cm H2O – 10 cm H2O).\\n\\n\\nPressure warning\\nSound alarm (Pneumatic alarm).\\n\\n\\nIndicator light\\nOn indicates that the device is in operation.\\n\\n\\nWorking noise\\nNot more than 55dB (A).\\n\\n\\nGas input\\nMedical oxygen 0.3MPa-0.4MPa.\\n\\n\\nPower supply\\nAc 220V ± 22V , 50Hz ± 1Hz.\\n\\n\\n https://www.sstechnomed.in/restohealth-03-bubble-cpap-machine.htm https://www.sstechnomed.in/restohealth-03-bubble-cpap-machine.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description The Neonatal Continuous Positive Airway Pressure (Nasal-CPAP) Support System delivers continuous positive airflow through nasal or nasal congestion interfaces to support neonatal breathing. It is designed for use under spontaneous breathing conditions, where the patient: Has a stable respiratory drive Maintains an appropriate tidal volume Throughout the breathing cycle, a controlled level of positive airway pressure is maintained to: Prevent airway collapse Increase functional residual capacity Improve lung compliance Enhance oxygenation In this mode, the ventilator only maintains positive airway pressure and does not provide mechanical ventilation. It is ideal for providing continuous positive pressure ventilation support for newborns with spontaneous breathing. Product Superiority Provides safe and controllable oxygen concentration for the baby Effectively maintains functional residual lung capacity Helps reduce the baby’s breathing effort Minimizes the need for invasive mechanical ventilation Delivers better humidified gas to the baby Significantly reduces the incidence of Chronic Lung Disease (CLD) Improves physiological lung indicators such as height and weight CPAP Pressure Generator Features CPAP pressure bar allows easy setting of pressure from 3 to 250 px water column Automatic water level adjustment mechanism maintains constant CPAP pressure Removable water tank ensures uninterrupted CPAP operation Technical Specifications Ventilation Mode: CPAP (Bubble CPAP) mode Scope of Application: Suitable for spontaneous breathing support in newborns using continuous positive pressure ventilation Flow Regulation (LPM): 0 – 10 LPM (varies with different air-oxygen blenders) Oxygen Concentration (O₂%): 21% – 100% CPAP Pressure: 300 Pa – 1000 Pa (3 cm H₂O – 10 cm H₂O) Pressure Warning: Sound alarm (pneumatic alarm) Indicator Light: Lights up when the device is in operation Working Noise: Not more than 55 dB(A) Gas Input: Medical oxygen at 0.3 MPa – 0.4 MPa Power Supply: AC 220V ± 22V, 50Hz ± 1Hz https://www.sstechnomed.in/resp-17-infant-resuscitator.htm https://www.sstechnomed.in/resp-17-infant-resuscitator.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Infant Resuscitator (Model: RESP-17) Our organization has experienced an impressive rise as a trusted Infant Resuscitator (RESP-17) supplier, owing to our ability to meet wholesale demands with ease. Backed by a capacious warehouse, we are well-equipped to handle urgent and bulk orders without delay. Additionally, we ensure complete safety and security of the products during storage and delivery. Product Highlights: Infant Resuscitator Primarily used in the delivery room, baby wards, and NICU for infants weighing up to 10 kg Built-in differential pressure alarm system On alarm, the safety valve activates automatically and continues to supply mixed gas, ensuring patient safety Oxygen concentration adjustable from 21% to 100% Flow adjustment range: 5 LPM to 15 LPM MAX-P (Maximum Airway Pressure) and PIP (Peak Inspiratory Pressure) are: Safe Controlled Accurate PEEP (Positive End-Expiratory Pressure) remains constant and precise Simple operation with flexible application Output pressure remains unaffected by: Operator's experience Training level Attention span Fatigue Technical Parameters   Pressure Gauge: –2 to 10 kPa (–20 to 100 cm H₂O) MAX-P: @0–15 LPM ≤ 6 kPa (60 cm H₂O) PIP: @5–15 LPM 0.2 – 5.7 kPa (2 – 57 cm H₂O) PEEP: @5–15 LPM 0.03 – 2.3 kPa (0.3 – 23 cm H₂O) Model RESP-17: Comes with inbuilt Air/Oxygen Blender https://www.sstechnomed.in/resp-23-infant-resuscitator.htm https://www.sstechnomed.in/resp-23-infant-resuscitator.htm Mon, 30 Jun 2025 00:00:00 +0530 Description Infant Resuscitator The Infant Resuscitator is primarily used in the delivery room, baby wards, and NICU, and is suitable for infants with a maximum weight of up to 10 kg. Key Features: Mainly used in: Delivery rooms Baby wards NICU Built-in differential pressure alarm system When triggered, the safety valve starts automatically and continues supplying mixed gas to ensure patient safety Oxygen concentration adjustable from 21% to 100% Flow adjustment range: 5 LPM – 15 LPM MAX-P and PIP are: Safe Controlled Accurate PEEP remains constant and precise Simple operation with flexible application Output pressure remains unaffected by: Operator’s experience Training level Attention Fatigue Technical Parameters Pressure Gauge: –2 to 10 kPa (–20 to 100 cm H₂O) MAX-P: @0–15 LPM ≤ 6 kPa (60 cm H₂O) PIP: @5–15 LPM 0.2 – 5.7 kPa (2 – 57 cm H₂O) PEEP: @5–15 LPM 0.03 – 2.3 kPa (0.3 – 23 cm H₂O) https://www.sstechnomed.in/electric-oxygen-concentrator.htm https://www.sstechnomed.in/electric-oxygen-concentrator.htm Mon, 30 Jun 2025 00:00:00 +0530 Oxygen Concentrator Rapid Pressure Swing Adsorption (RPSA) – NASA derived technology. Purity of Oxygen accords with Medical Standards. Built-in Pulse Oximeter (SP02 Monitor) & Provision of Adult, Pediatric, Neonatal Probes       (Optional). No Other Raw Material required except Air Adjustable Flow Meter with 0.5 LPM variation. In-Built Device for Nebulizing Therapy. Low Power Consumption with uninterrupted flow of Oxygen. Humidifier with Safety Valve with Audible Alarm in case of Obstruction. Safety Fuse/Transformer for Protection of machine in case of Power Fluctuation. Quiet Unit – Allowing Restful Sleep to the Patient. Heavy Base with Sturdy Castors for Smooth Mobility. Provision for Installation in Ambulance. Different Models with 3L, 5L, 8L & 10L Capacity per minute flow for Single and Double https://www.sstechnomed.in/shi-01-respiratory-humidifier.htm https://www.sstechnomed.in/shi-01-respiratory-humidifier.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description We own a substantial and well-organized storage facility, maintained by experienced professionals. All final packaging and storage operations are conducted only after complete serialization, ensuring zero last-minute hassle. For financial transactions, we use secured payment procedures and also support a range of negotiable instruments, offering flexibility and trust to our customers. Product Details Compatible with both imported and domestic ventilators and CPAP systems for heating and humidifying Operates with a microprocessor-based, contact-less control system, ensuring constant and reliable performance Ergonomic design allows efficient utilization of space Equipped with a digital display for easy and accurate monitoring Automatic temperature control with an overheat protection device for added safety Maximum temperature of the heating plate is not more than 85°C Automatically maintains temperature in the range of 28°C to 40°C Device accessories can be cleaned with conventional disinfectants and are compatible with high-pressure sterilization https://www.sstechnomed.in/shi-02-respiratory-humidifier.htm https://www.sstechnomed.in/shi-02-respiratory-humidifier.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Quality Assurance & Shipping Efficiency With stringent quality checks of raw materials and other inputs, we ensure that the final product is completely free from defects. To achieve this, we utilize the latest technology and machinery throughout the production process. We also offer reliable and well-structured shipping facilities, with meticulous record-keeping to enhance operational efficiency and earn customer trust. Product Details   Compatible with both imported and domestic ventilators and CPAP systems for heating and humidifying Offers constant and reliable operation through a microprocessor-based, contact-less control system Ergonomic design allows for efficient space utilization Easy to monitor via a digital display Equipped with automatic temperature control and an overheat protection device Maximum heating plate temperature: not more than 85°C Temperature control range: 28°C to 40°C Accessories can be cleaned with standard disinfectants and are suitable for high-pressure sterilization https://www.sstechnomed.in/medical-ultraviolet-sterilizer.htm https://www.sstechnomed.in/medical-ultraviolet-sterilizer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Introducing ultraviolet Sterilizer a product manufactured from state of the art technology for sterilizing the air within the sterilization chamber. An ultraviolet ray is a band of light with short wavelength from 2000 to 2950 angstrom units which posses the greatest germicidal effects of all ultraviolet wavelengths, particularly the wavelengths of 2537 angstrom units. It is extensively used to destroy airborne bacteria, virus, mould pores etc. Ultraviolet sterilizer can be kept on even during the operations as special measures are taken to save against direct radiation, this unit can be mounted on Wall, Kept on the Table or kept at a Suitable Place. Five Steps of Sterilization Step-I Dust Filter Step-II 15 Micron Filter Step-Ill Carbon Fitter (Optional) Step-IV U. V. Filter Step-V Ionizer (Optional) https://www.sstechnomed.in/inc-1723d-baby-incubator.htm https://www.sstechnomed.in/inc-1723d-baby-incubator.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Two function control modes provide clinicians with greater flexibility to optimize the thermal environment The skin temperature display is larger than the set/air temperature display, enhancing visibility Removable heater and control unit allow for easy cleaning and servicing Designed with an acrylic hood to ensure full visibility and accessibility of the baby Safety Features & Alarms A comprehensive alarm system ensures safety and convenience through audible and visual indicators for the following conditions: Probe Failure Power Failure High Temperature Low Temperature Additional safety and usability features include: Skin temperature display convertible from °C to °F with the push of a button Large LCD screen provides detailed information and visualizes heater power across different modes High and low temperature alarm limits can be adjusted based on patient condition Humidification is facilitated by two water trays positioned at the back of the unit Three side trays at the bottom offer convenient storage for consumables Unit is mounted on four large castors, with brakes on the front wheels for added stability Optional Features   Oxygen Delivery System Electric Slow Suction CFL Phototherapy https://www.sstechnomed.in/air-purifiers.htm https://www.sstechnomed.in/air-purifiers.htm Wed, 15 Nov 2017 00:00:00 +0530 Our products are the preferred choice of many, as they are grade assured and as per international quality management systems. Packaging of the products at our end is done using quality material. Thus, our professional packing staff makes sure that there will be zero damage to the orders received by customers. https://www.sstechnomed.in/15-led-double-surface-sunshine-phototherapy-unit.htm https://www.sstechnomed.in/15-led-double-surface-sunshine-phototherapy-unit.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description This has been achieved by exposing the infant to bright light (approximately 4.5 micro watts/sq cm/nm) in the range of 420-480 nm wave length by use of conventional phototherapy unit has been one of SSTECHNOMED most important focus in the field of neonatalogy for many order to remove the limitation of fluorescent  and CFL tubes, SSTECHNOMED has utilised long lasting, durable, more efficient and cost effective LEDs with more than double the flux as against what is radiated from conventional, fluorescent and CFL, for jaundice treatment. Parameter LED 9/12/15 hi power LEDs(blue)(white LED optional) Irradiance >42 mw/cm2/nm at 30cm Light source lifetime minimum 25,000hrs. Less than 10% change in illumination after 25,000hrs(irradiance) Wavelength 420-480 nm Variation in intensity for 6 hours<10% Effective area 50 cm X 30 cm. ElectricalInput voltage 100-240 V, 50-60Hz Technical Specification   Front 18” (L)x 8.5” (w) x3”(H) Height (adjustable) Min : 1230 mm Max : 1600mm Length 800mm Width 720mm Backside 18” x 8.5” x 3”   Baby Bassinet Clear Collapsible fold down side panels Baby Tray with Transparent base for Undersurface Phototherapy usage. Lower Shelf Movable Castors Undersurface LED Phototherapy Same as over head placed under the bassinet. Optional LCD Digital Timer for lamp usage hours and patient exposure. x-ray Cassette guide facility. Inbuilt lux meter https://www.sstechnomed.in/tiana-dx2-infant-radiant-warmer.htm https://www.sstechnomed.in/tiana-dx2-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Manual Mode Allows conversion from servo mode to manual mode for uninterrupted operation In manual mode, heat output is locked at 50% for added infant protection Heater Assembly Located above the center of the support structure Consists of a radiant heater and reflector Includes an inbuilt LED examination lamp for assessing infant skin color Heater head is swivelable to either direction for flexible positioning Baby Bed Features a spacious design Equipped with easy drop-down side glasses for maximum access to the patient Castors Fitted with 4″ high-quality castors, front two with brakes for stability Antistatic castors available as an option for enhanced safety Dimensions (Approx.) Height: 1920 mm Length: 890 mm Width: 860 mm Electrical Specifications Power Supply: 220V / 50 Hz Heater Power: 650 Watts Fuse: 5 Amp Storage   Includes a slide-out drawer system for storing medical consumables and accessories https://www.sstechnomed.in/tiana-nwdx-infant-radiant-warmer.htm https://www.sstechnomed.in/tiana-nwdx-infant-radiant-warmer.htm Mon, 30 Jun 2025 00:00:00 +0530 DESCRIPTION Control PanelThe TianaTm– DX(E) Infant Radiant Warmer comes with automatic manual and baby (Servo) modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of: High Temp./ Low Temp.  Power Failure System Fail Timer Probe Failure Heater fail /ON (Optional) only visual alarm provided Air Mode (Optional)The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event Manual ModeThe system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit. Baby BedThe spacious oval baby bed incorporates easy drop down/fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed fortaking X-ray of the baby without disturbing The First BreathThe Tiana – DX(E) Infant Radiant Warmer combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed. CastorsThe system is fitted with 4″ high quality castors having brakes in front 2 castors. Optional : Antistatic castors TrayThe unit comes Two trays below baby bed for keeping consumables. Phototherapy Unit (Optional)The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit. Additional FeaturesIf needed the unit can be programmed by the user himself for any of the following features: (A) Count Up / down Timer. (B) Check baby Alarm. (C) Pre warming mode. https://www.sstechnomed.in/tiana-d-open-care-system.htm https://www.sstechnomed.in/tiana-d-open-care-system.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Control Panel The TianaTM – D open care system comes with automatic manual and baby (Servo) modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of: High Temp./ Low Temp.    • Power Failure System Fail                          •  Timer -On Probe Failure                       • Heater fail / ON (Optional) only visual alarm provided   Heater Assembly The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica/ quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures. The Heater is also equipped with LED Phototherapy on both side to provide light intensity effective on the baby bed   Air Mode (Optional) The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event   Technical Specification Height 1850mm Length 1050mm Width 650mm Power Supply 220V/50Hz Heater Power 650 Watts Fuse 5 Amp   Additional Features If needed the unit can be programmed by the user itself for any of the following features: (a)  Count Up / down Timer. (b)  Check baby Alarm. (OPTIONAL). (C)  Pre warming mode   Manual Mode The system automatically starts heating from 40% in manual mode and the same can be changed through settings Up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit. Baby Bed The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing Led Phototherapy (Optional) Tiana D comes with choice of highly efficient and bright 12/15 choice of LED’s on each side of the heater. The strong lux of 24/30 LED’s cure jaundice in baby rapidly   Technical  Specification Light Source :- High Bright Blue/Whit LED’s Wavelength : – 450-470µm. Irradiance    : – < 35 µw/cm/nm. https://www.sstechnomed.in/tiana-dx-open-care-system.htm https://www.sstechnomed.in/tiana-dx-open-care-system.htm Mon, 30 Jun 2025 00:00:00 +0530 Control Panel The TianaTM – DX Open care System comes complete with automatic manual and baby (Servo) modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of :• High Temp./ Low Temp.  • System Fail   • Probe Failure • Power Failure • Timer • Heater fail / ON (Optional) only visual alarm provided Heater AssemblyThe heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either direction for taking X-ray and doing procedures. Air Mode (Optional)The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event. Manual ModeThe system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit. Baby BedThe spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.Optional : X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing. The First BreathThe open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed. CastorsThe system is fitted with 4″ high quality castors having brakes in front 2 castors.  Optional : antistatic castors StorageThe unit comes fitted with two drawer system which slides out for keeping consumables. Phototherapy Unit (Optional)The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit. Additional FeaturesIf needed the unit can be programmed by the user himself for any of the following features:(a) Count Up / down Timer. (b) Check baby Alarm.  (c) Pre warming mode. Technical Specification   Height 1924mm Length 1090mm Width 760mm Power Supply 220V/50Hz Heater Power 650 Watts Fuse 5 Amp his product. https://www.sstechnomed.in/15-led-single-surface-sunshine-phototherapy-unit.htm https://www.sstechnomed.in/15-led-single-surface-sunshine-phototherapy-unit.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description This has been achieved by exposing the infant to bright light (approximately 4.5 micro watts/sq cm/nm) in the range of 420-480 nm wave length by use of conventional phototherapy unit has been one of SS TECHNOMED most important focus in the field of neonatology for many years. In order to remove the limitation of fluorescent and CFL tubes, SS TECHNOMED has utilized long lasting, durable, more efficient and cost effective LEDs with more than double the flux as against what is radiated from conventional, fluorescent and CFL, for jaundice treatment. Parameter LED 9-12 hi power LEDs(blue) (white LED optional) Irradiance >42 mw/cm2/nm at 30cm Light source lifetime minimum 25,000hrs. Less than 10% change in illumination after 25,000hrs (irradiance) Wavelength 420-480 nm Variation in intensity for 6 hours<10% Effective area 50 cm X 30 cm. ElectricalInput voltage 100-240 V, 50-60Hz Dimensions   Front 18” (L)x 8.5” (w) x3”(H) Height (adjustable) Min : 1230 mm Max : 1600mm Length 800mm Width 720mm   Baby Bassinet Clear Collapsible fold down side panels Baby Tray with Transparent base for Undersurface Phototherapy usage. Lower Shelf Movable Castors Undersurface LED Phototherapy Same as over head placed under the bassinet. Double Surface Phototherapy Unit It is a combination of overhead phototherapy Unit and undersurface Phototherapy with Baby Bassinet. Optional LCD Digital Timer for lamp usage hours and patient exposure. X-ray Cassette guide facility. https://www.sstechnomed.in/hospital-baby-bassinet-trolley.htm https://www.sstechnomed.in/hospital-baby-bassinet-trolley.htm Mon, 30 Jun 2025 00:00:00 +0530 Produt Description We have experience in manufacturing the best medical equipment for the healthcare organizations. We design baby bassinets for total stability having securely welded support rods. Our baby bassinets have four-sided rail to prevent supplies from falling off and a shelf for linen and changing supplies. We are the leading manufacturers of baby bassinets. We manufacture baby bassinets having 3-inch swiveling casters to allow supremely easy transportation. Our brand provides secure movement of the baby and the product without any jerk. We make sure that safety of the baby is kept in mind at first while manufacturing the baby bassinets. Infant Baby Trolley at Best Price in Kenya. A baby is precious not only to the parents but to everyone and it becomes the responsibility of the healthcare organizations to take wise steps to ensure the safety of the newborns. Our best Infant Baby Trolley comes with a shelf and a carriage that provides an amazing workspace. We make sure that our clients leave with a satisfying smile. We have built the trust of thousands of healthcare units for being supreme manufacturers of medical equipment for years. Our reputation states our story. We are the best manufacturers of the medical equipment in the market. https://www.sstechnomed.in/bubble-cpap-machine.htm https://www.sstechnomed.in/bubble-cpap-machine.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description   Newborn / Pediatric CPAP Continuous Positive Airway Pressure Ventilation Support System Additional Features   Comes with inbuilt air-oxygen blender Compact and easy to carry with a built-in handle on the top Can be used as a transport CPAP when connected to a power supply and oxygen source Features a new concept built-in air compressor for easy Bubble CPAP Designed for low power consumption, ideal for spontaneous breathing support in newborns and children Small size, low noise, and maintenance-free, suitable for: NICU Patient transport Pediatric ward Other clinical environments https://www.sstechnomed.in/tia-3000-medical-air-compressor.htm https://www.sstechnomed.in/tia-3000-medical-air-compressor.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Medical Air Compressor Delivers dry, clean medical-grade compressed air Offers an optional cost-performance ratio Quiet performance makes it ideal for use in ICU / NICU environments Can serve as: A primary air source An automatic backup to the hospital's air pipeline system Support for medical ventilators and neonatal bubble CPAP units Product Features High flow capabilities for greater versatility Oil-free compressor motor with thermal cutout Automatic water removal system Large locking castors for easy transportation Compatible with any ventilator Simple and economical maintenance Provides consistent performance under all conditions Low power consumption Technical Specifications Nominal Voltage and Frequency: 220 VAC ± 10%, 50/60 Hz Compressor Efficiency: 50 L/min @ 3.5 bar* Air Tank Capacity: 2 Liters Air Filtration: 5 µm Dew Point Depression at 3 bar, 20°C: 5°C below ambient temperature Outlet Connection: DISS 1160-A (3/4″ – 16 UNF) Mode of Operation: Continuous Automatic Backup to Central Pipeline: On request Noise Level: ≤ 49 dB(A) Dimensions (L × B × H): 43.7 × 38.5 × 44 cm Weight: Approx. 45 kg Optional Accessories Ventilator Stand Additional Alarms: High Temperature, Low Pressure Circuit Support Arm https://www.sstechnomed.in/medical-oxygen-concentrators.htm https://www.sstechnomed.in/medical-oxygen-concentrators.htm Mon, 30 Jun 2025 00:00:00 +0530 Product Description Healthcare Industry The Oxygen Machine is designed to fully meet oxygen demands and offer safe, effective, and comfortable oxygen therapy in various medical conditions, including: Respiratory diseases such as: Chronic bronchitis Bronchial asthma Emphysema Pulmonary heart disease Pneumoconiosis Silicosis Cardio-cerebral vascular diseases such as: High blood pressure Arteriosclerosis Coronary heart disease Myocardial infarction Heart rate disorders Angina Cerebral thrombosis Cerebral apoplexy Ozone Industry Produces oxygen concentration over 90% on-site Doubles ozone concentration compared to air-based ozonizers Reduces electricity consumption by half, cutting overall costs Ideal for: Drinking water industry (mineral/purified water) Food industry Pharmaceutical industry (requiring high ozone levels) Beauty Industry Uses professional oil-free compressors Produces high-purity oxygen with no chemical or stimulating ingredients Suitable for: Deep skin care in beauty salons Aerobics and fitness centers Home skin treatments Acts as an effective auxiliary beauty therapy Technical Specifications   Flow Rate: Adjustable – 0–5 LPM, 0–8 LPM & 0–10 LPM Oxygen Concentration: 95% ± 3% (approx.) Oxygen Delivery Pressure: 6.00–10.15 PSI (up to 20 PSI) Power Supply: 220V ± 10%, 50 Hz Sound Level: < 50 dB (A) Power Consumption: Approx. 350 Watts Alarms: Low/High pressure Power failure Oxygen purity indicator (optional) Size: 720 mm (H) × 457 mm (W) × 422 mm Weight: 21–32 kg (variable) Others: Built-in pulse oximeter https://www.sstechnomed.in/oxygen-concentrators.htm https://www.sstechnomed.in/oxygen-concentrators.htm Mon, 30 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/digital-lux-meter.htm https://www.sstechnomed.in/digital-lux-meter.htm Mon, 30 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/jaundice-meter.htm https://www.sstechnomed.in/jaundice-meter.htm Mon, 30 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/baby-bassinet.htm https://www.sstechnomed.in/baby-bassinet.htm Mon, 26 May 2025 00:00:00 +0530 https://www.sstechnomed.in/scrub-suits.htm https://www.sstechnomed.in/scrub-suits.htm Thu, 05 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/hospital-uniforms.htm https://www.sstechnomed.in/hospital-uniforms.htm Mon, 30 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/hospital-gowns.htm https://www.sstechnomed.in/hospital-gowns.htm Mon, 30 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/lab-coats.htm https://www.sstechnomed.in/lab-coats.htm Thu, 05 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/4-pocket-men-medical-scrub-suits.htm https://www.sstechnomed.in/4-pocket-men-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 BELOW MEASUREMENTS ARE IN INCHES :- The size of our dress is based on the chest size. That means if your chest is 40”, the size 40(M) will best fit for you. However the actual size of chest in clothes is 44”. During size selection for extra long, extra short, extra obese body please consider right, waist and hip tool.Available Fabric:- 65% Polyester/35% Cotton Plain Wave – 180 GSM 50% Polyester/50% Cotton Plain Wave – 90 GSM   65% Polyester/35% viscose Plain Wave – 90 GSM Wash Care: Easy Machine Wash with similar colors Easy to wear and focused on comfort for our next-gen doctors & nurses. Keeps you comfortable through the long hours of working. Note: The color you see on your screen may not accurately reflect the true color of the product due to   variations in display settings. https://www.sstechnomed.in/4-pocket-women-medical-scrub-suits.htm https://www.sstechnomed.in/4-pocket-women-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 Product Description IMPORTANT NOTE: Measurements are in InchesThe size of our dress is based on chest measurement.For example, if your chest measures 33”, the size 33 (M) will fit you best.However, the actual chest measurement of the garment will be 37” to allow room for comfort.For extra-long, extra-short, or extra-obese body types, please also consider waist and hip measurements while selecting your size.Wash Care InstructionsEasy machine wash with similar colorsDesigned for comfort and easy wear, ideal for next-gen doctors and nursesKeeps you comfortable during long working hoursColor DisclaimerThe color you see on your screen may not accurately reflect the true color of the product due to display setting variationsAvailable Fabric Options65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/6-pocket-men-medical-scrub-suits.htm https://www.sstechnomed.in/6-pocket-men-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 Product Description Below Mesaurments are in InchesThe size of our dress is based on chest measurement.For example, if your chest measures 40”, then size 40 (M) will best fit you.However, the actual chest size of the garment is 44” to ensure a comfortable fit.When selecting a size for extra-long, extra-short, or extra-obese body types, please also consider the correct waist and hip measurements.Wash CareEasy machine wash with similar colorsEasy to wear and focused on comfort for next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color displayed on your screen may not accurately reflect the true color of the product due to variations in display settingsAvailable Fabric Options65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/6-pocket-women-medical-scrub-suits.htm https://www.sstechnomed.in/6-pocket-women-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 BELOW MEASUREMENTS ARE IN INCHES :-  The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit for you. However the actual size of chest in clothes is 37”. During size selection for extra long, extra short, extra obese body please consider right, waist and hip tool. Wash Care: Easy Machine Wash with similar colors Easy to wear and focused on comfort for our next-gen doctors & nurses. Keeps you comfortable through the long hours of working. Note: The color you see on your screen may not accurately reflect the true color of the product due to variations in display settingsAvailable Fabric:-  65% Polyester/35% Cotton Plain Wave – 180 GSM 50% Polyester/50% Cotton Plain Wave – 90 GSM   65% Polyester/35% viscose Plain Wave – 90 GSM https://www.sstechnomed.in/8-pocket-men-medical-scrub-suits.htm https://www.sstechnomed.in/8-pocket-men-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 Product Description Below Mesaurment are in InchesThe size of our dress is based on chest measurement.For example, if your chest size is 40”, the size 40 (M) will best fit you.The actual chest size of the garment is 44” to ensure a comfortable fit.For extra-long, extra-short, or extra-obese body types, please ensure to consider the correct waist and hip measurements using the appropriate tools.Wash CareEasy machine wash with similar colorsDesigned for comfort and ease of wear for our next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color displayed on your screen may not accurately reflect the actual product color due to variations in display settingsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/8-pocket-women-medical-scrub-suits.htm https://www.sstechnomed.in/8-pocket-women-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest measurement.For example, if your chest measures 33”, the size 33 (M) will fit you best.The actual garment chest size is 37” for a comfortable fit.For extra-long, extra-short, or extra-obese body types, please consider using the correct waist and hip measurements for accurate sizing.Wash CareEasy machine wash with similar colorsDesigned to be easy to wear and focused on comfort for our next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color displayed on your screen may not accurately reflect the actual product color due to variations in display settingsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/11-pocket-men-medical-scrub-suits.htm https://www.sstechnomed.in/11-pocket-men-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest measurement.For example, if your chest size is 40”, the size 40 (M) will best fit you.However, the actual garment chest size is 44” for added comfort.For extra-long, extra-short, or extra-obese body types, please ensure you also consider the correct waist and hip measurements.Wash CareEasy machine wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color shown on your screen may not exactly match the actual product color due to variations in display settingsAvailable Fabric Options65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/11-pocket-women-medical-scrub-suits.htm https://www.sstechnomed.in/11-pocket-women-medical-scrub-suits.htm Mon, 11 Aug 2025 00:00:00 +0530 BELOW MEASUREMENTS ARE IN INCHES :-    The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit for you. However the actual size of chest in clothes is 37”. During size selection for extra long, extra short, extra obese body please consider right, waist and hip tool   Wash Care: Easy Machine Wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nurses. Keeps you comfortable through the long hours of working.   Note: The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.   Available Fabric: 65% Polyester/35% Cotton Plain Wave – 180 GSM50% Polyester/50% Cotton Plain Wave – 90 GSM65% Polyester/35% viscose Plain Wave – 90 GSM https://www.sstechnomed.in/v-shape-green-nurse-uniform.htm https://www.sstechnomed.in/v-shape-green-nurse-uniform.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest measurement.For example, if your chest size is 33”, then size 33 (M) will best fit you.However, the actual chest size of the garment is 37” to provide a comfortable fit.For extra-long, extra-short, or extra-obese body types, please use the correct waist and hip measurement tools for accurate size selection.Wash CareEasy machine wash with similar colorsEasy to wear, focused on comfort for our next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color displayed on your screen may not accurately reflect the actual product color due to display setting variationsAvailable Fabric Options65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/men-surgeon-gown.htm https://www.sstechnomed.in/men-surgeon-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on the chest measurement.For example, if your chest size is 40”, the size 40 (M) will best fit you.However, the actual garment chest size is 44” to ensure comfortable wear.For extra-long, extra-short, or extra-obese body types, please consider the correct waist and hip measurements using the right tools.Wash CareEasy machine wash with similar colorsDesigned for comfort and easy to wear, perfect for our next-gen doctors and nursesKeeps you comfortable through long working hoursNoteThe color shown on your screen may not exactly match the actual product color due to differences in display settingsAvailable Fabric Options65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/women-surgeon-gown.htm https://www.sstechnomed.in/women-surgeon-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest size.For example, if your chest measures 33”, then size 33 (M) will best fit you.However, the actual chest size of the garment is 37” for added comfort.For extra-long, extra-short, or extra-obese body types, please consider using the correct waist and hip measurements during selection.Wash CareEasy machine wash with similar colorsComfort-focused and easy to wear, ideal for next-gen doctors and nursesEnsures comfort throughout long working hoursNoteThe color displayed on your screen may not exactly reflect the actual product color due to variations in screen settingsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/mens-gda-uniform.htm https://www.sstechnomed.in/mens-gda-uniform.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest size.For example, if your chest size is 40”, then size 40 (M) will best fit you.However, the actual chest size in the garment is 44” for a comfortable fit.For extra-long, extra-short, or extra-obese body types, please use the correct waist and hip measurement tools during size selection.Wash CareEasy machine wash with similar colorsComfort-focused design, ideal for next-gen doctors and nursesKeeps you comfortable during long working hoursNoteThe color displayed on your screen may not accurately reflect the true product color due to variation in display settingsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/women-gda-uniform.htm https://www.sstechnomed.in/women-gda-uniform.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest size.For example, if your chest measures 33”, then size 33 (M) will best fit you.However, the actual chest size in the garment is 37” for a more relaxed fit.For extra-long, extra-short, or extra-obese body types, please consider the correct waist and hip tools while selecting the size.Wash CareEasy machine wash with similar colorsDesigned for comfort and ease of wear, especially for next-gen doctors and nursesKeeps you comfortable through long working hoursNoteThe color you see on your screen may not accurately reflect the true product color due to display setting variationsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/women-housekeeping-uniforms.htm https://www.sstechnomed.in/women-housekeeping-uniforms.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on chest size.For example, if your chest measures 33”, then size 33(M) will best fit you.However, the actual chest size in the garment is 37” for comfort.During size selection for extra-long, extra-short, or extra-obese body types, please consider the right waist and hip measurements.Wash CareEasy machine wash with similar colorsDesigned for comfort and flexibilityIdeal for our next-gen doctors and nursesKeeps you comfortable through long working hoursNoteThe color displayed on your screen may not accurately reflect the actual product color due to display setting variationsAvailable Fabric Options 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/mens-patient-gown.htm https://www.sstechnomed.in/mens-patient-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in InchesThe size of our dress is based on the chest size.For example, if your chest is 40”, then size 40(M) will best fit you.However, the actual chest measurement of the garment is 44” to ensure comfort.While choosing a size for extra-long, extra-short, or extra-obese body types, please consider the correct waist and hip measurements.Wash CareEasy machine wash with similar colors.Designed for easy wear, with a focus on comfort for our next-gen doctors and nurses.Keeps you comfortable through long working hours.NoteThe color you see on your screen may not accurately reflect the actual color of the product due to display setting variations.Available Fabric 65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/women-patient-gown.htm https://www.sstechnomed.in/women-patient-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size.For example, if your chest is 33”, then size 33(M) will best fit you.However, the actual chest size in the garment is 37” for comfort.During size selection for extra-long, extra-short, or extra-obese body types, please consider the correct waist and hip measurements.Wash CareEasy machine wash with similar colors.Easy to wear and focused on comfort for our next-gen doctors & nurses.Keeps you comfortable through long working hours.NoteThe color you see on your screen may not accurately reflect the true color of the product due to display setting variations.Available Fabric65% Polyester / 35% Cotton, Plain Weave – 180 GSM50% Polyester / 50% Cotton, Plain Weave – 90 GSM65% Polyester / 35% Viscose, Plain Weave – 90 GSM https://www.sstechnomed.in/yellow-mens-patient-gown.htm https://www.sstechnomed.in/yellow-mens-patient-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on chest measurement.For example, if your chest is 40”, then size 40(M) will best fit you.However, the actual chest measurement in the garment is 44” to allow for comfortable wear.For extra long, extra short, or extra obese body types, please also consider the waist and hip measurements for the right fit.Wash CareEasy machine wash with similar colors.Designed for comfort, especially for our next-gen doctors and nurses.Keeps you comfortable through long working hours.NoteThe color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/yellow-women-patient-gown.htm https://www.sstechnomed.in/yellow-women-patient-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow measurements are in inches:The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit for you. However, the actual chest size in the clothes is 37”.During size selection for extra long, extra short, or extra obese body types, please consider the right waist and hip measurements.Wash Care:Easy machine wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color displayed on your screen may not accurately reflect the actual product color due to variations in display settings.Available Fabric:65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/kid-patient-gown.htm https://www.sstechnomed.in/kid-patient-gown.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionWash Care:Easy machine wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric: 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/mens-lab-coat.htm https://www.sstechnomed.in/mens-lab-coat.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 40”, the size 40(M) will best fit you.However, the actual chest size of the garment is 44”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for easy wear and focused on comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric: 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/women-lab-coat.htm https://www.sstechnomed.in/women-lab-coat.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit you.However, the actual chest size of the garment is 37”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsEasy to wear and designed for maximum comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric:65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/maroon-mens-lab-coat.htm https://www.sstechnomed.in/maroon-mens-lab-coat.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 40”, the size 40(M) will best fit you.However, the actual chest size of the garment is 44”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for ease of wear and comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric: 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/maroon-women-lab-coat.htm https://www.sstechnomed.in/maroon-women-lab-coat.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit you.However, the actual chest size of the garment is 37”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for easy wear and comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color displayed on your screen may not accurately reflect the actual product color due to variations in display settings.Available Fabric: 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/blue-maternity-scrubs-uniform.htm https://www.sstechnomed.in/blue-maternity-scrubs-uniform.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit you.However, the actual chest size of the garment is 37”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for easy wear and enhanced comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true product color due to variations in display settings.Available Fabric: 65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/men-medical-scrub-suit.htm https://www.sstechnomed.in/men-medical-scrub-suit.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 40”, the size 40(M) will best fit you.However, the actual chest size of the garment is 44”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for easy wear and maximum comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color displayed on your screen may not accurately reflect the true product color due to variations in display settings.Available Fabric:65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/women-medical-scrub-suit.htm https://www.sstechnomed.in/women-medical-scrub-suit.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionBelow Measurements Are in Inches:The size of our dress is based on the chest size. That means if your chest is 33”, the size 33(M) will best fit you.However, the actual chest size of the garment is 37”.During size selection for extra long, extra short, or extra obese body types, please consider the correct waist and hip measurements.Wash Care:Easy machine wash with similar colorsDesigned for easy wear and enhanced comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings.Available Fabric:65% Polyester / 35% Cotton Plain Weave – 180 GSM50% Polyester / 50% Cotton Plain Weave – 90 GSM65% Polyester / 35% Viscose Plain Weave – 90 GSM https://www.sstechnomed.in/surgeon-head-cap.htm https://www.sstechnomed.in/surgeon-head-cap.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionWash Care: Easy Machine Wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nurses. Keeps you comfortable through the long hours of working.Note: The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings. https://www.sstechnomed.in/hospital-bed-sheet.htm https://www.sstechnomed.in/hospital-bed-sheet.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionWash Care: Easy Machine Wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nurses. Keeps you comfortable through the long hours of working.Note: The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings. https://www.sstechnomed.in/white-hospital-pillow.htm https://www.sstechnomed.in/white-hospital-pillow.htm Mon, 11 Aug 2025 00:00:00 +0530 Product DescriptionWash Care:Easy machine wash with similar colorsEasy to wear and focused on comfort for our next-gen doctors & nursesKeeps you comfortable through long working hoursNote:The color you see on your screen may not accurately reflect the true color of the product due to variations in display settings. https://www.sstechnomed.in/hospital-bads.htm https://www.sstechnomed.in/hospital-bads.htm Mon, 16 Jun 2025 00:00:00 +0530 https://www.sstechnomed.in/electric-icu-bed.htm https://www.sstechnomed.in/electric-icu-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description Advanced linear actuator system (6 pcs motor, 1 pc control box, 1 pc handset, 1 pc nurse control system (ACP)) Extra-long, 4-piece underside Occidental-style side rails with inclination degree indicators Heavy-duty ABS head and foot panel with locking and buffer Four-section operating framework made up of M.S. tubes Bed mounted on 6" central locking ABS castors – durable and quiet 5S telescopic I.V. rod with 4 locations Holder for urine bag Sitting position adjustable table Leg section expandable Finish: Pre-treated & epoxy powder coated Overall approximate size: 1970–2120(L) × 500(W) × 460–740(H) mm C4 section mattress LED lamp usable as reading lamp or under-bed lamp Positions Obtained / Functions on Nurse Control System (ACP)   Hi-Low with locking function or handset Backrest elevation with locking function or handset Knee rest elevation with locking function or handset Trendelenburg / Reverse Trendelenburg with locking function or handset One-button electric CPR position and manual CPR function for emergency cases https://www.sstechnomed.in/sst-mboo23-electric-icu-bed.htm https://www.sstechnomed.in/sst-mboo23-electric-icu-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description Four-piece individual side rails, ABS molded Heavy ABS head and foot panel with locking 4-section top made up of perforated CRCA M.S. sheet Framework made up of M.S. tubes Bed mounted on 5" ABS castors, 2 with brakes Holder for urine bag Sitting position adjustable table Finish: Pre-treated & epoxy powder coated Overall approximate size: 2090(L) × 500(W) × 580–750(H) mm Positions Obtained by Smooth Crank System with Foldable Handle Hi-Low Backrest elevation Knee rest elevation Trendelenburg / Reverse Trendelenburg Optional C4 section mattress 5S telescopic I.V. rod with 4 locations Stainless steel / mild steel railing Stainless steel head & foot bows https://www.sstechnomed.in/sst-mboo24-electric-icu-bed.htm https://www.sstechnomed.in/sst-mboo24-electric-icu-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description Two-piece individual detachable side rails Collapsible side railing ABS head and foot panel 4-section top made of oval perforated CRCA M.S. sheet Framework made of M.S. tubes Bed mounted on 5" castors, 2 with brakes Holder for urine bag Finish: Pre-treated & epoxy powder coated Overall approximate size: 2000(L) × 900(W) × 600(H) mm Positions Obtained by Smooth Crank System With foldable handle: Backrest elevation Knee rest elevation Trendelenburg / Reverse Trendelenburg Optional   C4 section mattress S.S. telescopic I.V. rod with 4 locations Stainless steel head & foot bows https://www.sstechnomed.in/sst-0020-electric-icu-bed.htm https://www.sstechnomed.in/sst-0020-electric-icu-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description ● Two-piece individual detachable collapsible side rails ● ABS molded head and foot panel ● Framework made up of M.S. tubes ● 4-section top made of oval perforated CRCA M.S. sheet ● Bed mounted on 4" castors, 2 with brakes ● Four I.V. rod locations ● Finish: Pre-treated & epoxy powder coated ● Overall approximate size: 2000(L) × 900(W) × 600(H) mm Positions Obtained by Foldable Handle ● Backrest elevation ● Knee rest elevation Optional ● 4-section mattress ● S.S. telescopic I.V. rod ● Four-piece individual side rails, ABS molded ● S.S. head & foot panels https://www.sstechnomed.in/sst-0021-electric-icu-bed.htm https://www.sstechnomed.in/sst-0021-electric-icu-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description ● Advanced linear actuator system (2 pcs motor, 1 pc control box, 1 pc handset) ● Four-piece individual side rails, ABS moulded ● ABS moulded head and foot panel with locking and corner buffer ● Framework made up of M.S. tubes ● 4-section top made of oval perforated CRCA M.S. sheet ● Bed mounted on 4" castors, 2 with brakes ● Finish: Pre-treated & epoxy powder coated ● Overall approximate size: 2000(L) × 900(W) × 600(H) mm Positions Obtained by Hand Remote ● Backrest elevation ● Knee rest elevation Optional   ● C4 section mattress ● S.S. telescopic I.V. rod with 4 locations ● 2-piece individual detachable collapsible side rails https://www.sstechnomed.in/hydraulic-operation-table.htm https://www.sstechnomed.in/hydraulic-operation-table.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description The Deluxe O.T. Table is suitable for a wide range of surgical procedures, including general surgery, neurology, urology, gynecology, laparoscopy, and more. The base and column are made of high-quality medical-grade stainless steel (Grade 304), offering a non-reflective surface that is antibacterial and easy to clean. It features multiple positions for advanced surgical flexibility: Height adjustment Lateral tilts Trendelenburg and Reverse Trendelenburg Flex-Reflex position Chair position Kidney bridge position Specifications Length of Table: 1900 mm Width of Table Top: Minimum 750 mm Minimum Height (without mattress): — Maximum Height (without mattress): 1000 mm Trendelenburg: 25° Reverse Trendelenburg: +20° Lateral Tilt: +60° Back Section: +60° Head Section: 90° Leg Section: — Floor Locking System: Manual Standard Accessories   Precision-made hydraulic system with single lever action Hydraulic lift controlled by foot pedal Stainless steel fittings Detachable head and leg sections Built-in kidney bridge and large perineal cut-out for drainage https://www.sstechnomed.in/labour-delivery-room-bed.htm https://www.sstechnomed.in/labour-delivery-room-bed.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description Approx. dimensions: 2100 mm (L) × 1046 mm (W) Height adjustment (without mattress): 640 mm to 910 mm Three-section laminated top with perineal "U" notch Backrest, height, Trendelenburg, and reverse Trendelenburg adjustments operated electrically via actuators with a user-friendly handset Leg section can be telescoped under the backrest section for lithotomic positions Removable polymer head and foot boards Pair of polymer railings Middle and leg section tops are removable for cleaning Complete with: Stainless steel tray Stainless steel telescopic IV pole Stainless steel hand grips Padded lithotomy crutches (pair) Rubber buffers PU foam mattress covered with rexine Four heavy-duty castors (150 mm dia) with central and directional locking system Battery backup with built-in charger Finish: Pretreated and powder-coated Certification: CE Certified   Also available in Hydraulic Height Adjustment https://www.sstechnomed.in/compact-phototherapy-unit.htm https://www.sstechnomed.in/compact-phototherapy-unit.htm Tue, 12 Aug 2025 00:00:00 +0530 Product Description In the new born period i.e birth to one month, jaundice can pose a serious problem, because high level of the bilirubin, can be decomposed to a harmless metabolic which is water soluble, does not cross blood brain barrier and is rapidly excreted in the bile and urine and so does not accumulate. This has been achieved by exposing the infant to bright light (approximately 4.5 micro watts/sq cm/nm) in the range of 420-480 nm wave length. Phototherapy unit has been one of SS TECHNOMED most important focus in the field of neonatology for many years. In order to remove the limitation of CFL tubes, SS TECHNOMED (P) Ltd. has utilized long lasting, durable, more efficient and cost effective LEDs with more than double the flux as against what is radiated from conventional, CFL Tube for jaundice treatment.   Technical Specificiation   Parameter LED 9-12-24 hi power LEDs (blue) (white LED optional) Irradiance >42 mw/cm2/nm at 45cm Light source lifetime minimum 25,000hrs. Less than 10% change in illumination after 25,000hrs (irradiance) Wavelength 420-480 nm Variation in intensity for 6 hours <10% Effective area 50 cm X 30 cm   BABY BASSINET FEATURES Clear Collapsible fold down side panels Baby Tray with Transparent base for Undersurface Phototherapy usage. Lower Shelf     Movable Castors Undersurface LED Phototherapy Same as overhead placed under the bassinet. Electrical   Dimensions LED Box Front : 18” (L) x 10” (W) x 3” (H) Backside : 18” x 8.5” x 3” Height (adjustable) Min : 1230 mm, Max : 1600 mm Length : 800 mm, Width : 720 mm     OPTIONAL: Luxmeter: Inbuilt lux meter for checking light intensity of the unit by fixing sensor in the unit. Inbuilt Temp Sensor which switches off the unit when it reaches the set temp. point.   https://www.sstechnomed.in/shi-48-adjustable-colour-temperature-led-light.htm https://www.sstechnomed.in/shi-48-adjustable-colour-temperature-led-light.htm Tue, 12 Aug 2025 00:00:00 +0530 Special FeatureMemory function, high quality sterilizable handle, with protective fire resistant ESG safety glass for scratch proof, fast disinfection process, protects UV and IR rays and improve light penetration. With special European design for ventilation of heat. Body is made of high quality fire resistant polymer. https://www.sstechnomed.in/shi-28-adjustable-colour-temperature-led-light.htm https://www.sstechnomed.in/shi-28-adjustable-colour-temperature-led-light.htm Tue, 12 Aug 2025 00:00:00 +0530 Special Feature Memory function, high quality sterilizable handle, with protective fire resistant ESG safety glass for scratch proof, fast disinfection process, protects UV and IR rays and improve light penetration. With special European design for ventilation of heat. Body is made of high quality fire resistant polymer. https://www.sstechnomed.in/shi-23-adjustable-colour-temperature-led-light.htm https://www.sstechnomed.in/shi-23-adjustable-colour-temperature-led-light.htm Tue, 12 Aug 2025 00:00:00 +0530 Special Feature Memory function, high quality sterilizable handle, with protective fire resistant ESG safety glass for scratch proof, fast disinfection process, protects UV and IR rays and improve light penetration. With special European design for ventilation of heat. Body is made of high quality fire resistant polymer. https://www.sstechnomed.in/shi-12-adjustable-colour-temperature.htm https://www.sstechnomed.in/shi-12-adjustable-colour-temperature.htm Tue, 12 Aug 2025 00:00:00 +0530 Special FeatureMemory function, high quality sterilizable handle, with protective fire resistant ESG safety glass for scratch proof, fast disinfection process, protects UV and IR rays and improve light penetration. With special European design for ventilation of heat. Body is made of high quality fire resistant polymer. https://www.sstechnomed.in/shi-60-adjustable-colour-temperature-led-light.htm https://www.sstechnomed.in/shi-60-adjustable-colour-temperature-led-light.htm Tue, 12 Aug 2025 00:00:00 +0530 Special Feature Memory function, high quality sterilizable handle, with protective fire resistant ESG safety glass for scratch proof, fast disinfection process, protects UV and IR rays and improve light penetration. With special European design for ventilation of heat. Body is made of high quality fire resistant polymer. https://www.sstechnomed.in/operation-theatre-lights.htm https://www.sstechnomed.in/operation-theatre-lights.htm Tue, 24 Jun 2025 00:00:00 +0530