Infant Radiant Warmers

Control Panel
The TianaTm– DX(E) Infant Radiant Warmer comes with automatic manual and baby (Servo) modes.

In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:

• High Temp./ Low Temp. 
• Power Failure
• System Fail
• Timer
• Probe Failure
• Heater fail /ON (Optional) only visual alarm provided

Air Mode (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed
The spacious oval baby bed incorporates easy drop down/fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed fortaking X-ray of the baby without disturbing

The First Breath
The Tiana – DX(E) Infant Radiant Warmer combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed.

Castors
The system is fitted with 4″ high quality castors having brakes in front 2 castors. Optional : Antistatic castors

Tray
The unit comes Two trays below baby bed for keeping consumables.

Phototherapy Unit (Optional)
The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit.

Additional Features
If needed the unit can be programmed by the user himself for any of the following features: (A) Count Up / down Timer. (B) Check baby Alarm. (C) Pre warming mode.

Manual Mode
Facility of converting the warmer from servo mode to manual mode for non-stop working. The heat in the manual mode is locked at 50% to give more protection for the baby.

Heater Assembly
The Heater assembly located above the center of the support structure consists of radiant heater and reflector with inbuilt LED examination lamp for assessment of Infant color. The heater can be swiveled to either direction.

Baby Bed
The attached spacious baby bed incorporates easy drop down glasses for maximum access to the patient.

Castors
The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.

Dimensions (Approx.)
Height- 1920mm x Length- 890mm x Width- 860mm

Electrical Specifications
Power Supply: 220V/50Hz
Heater Power: 650 Watts
Fuse: 5 Amp

Storage
The unit comes fitted with one drawer system which slides out for keeping consumables.

Control Panel
The TianaTM – S Infant Radiant Warmer  comes complete with automatic manual /baby (Servo)/Air modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of :
• High Temp./ Low Temp.  •  System Fail  • Probe Failure  •  Power Failure  • Timer  •  Heater fail / ON (Optional) only  visual alarm provided

Heater Assembly
The Parabolic heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either direction for taking X-ray and doing procedures.

Air Mode (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event.

Manual Mode
 The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.
Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing.

Additional Features
If needed the unit can be programmed by the user itself for any of the following features:
(a) Count Up / down Timer.
(b) Check baby Alarm.
(c)  Pre warming mode.

Castors
The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.

Optional : The system comes with check baby alarm ( 1 – 120min.)

Technical Specification

Manual / Servo  control modes provide the clinician more flexibility while optimizing the thermal environment. In addition the skin / Air temperature display is larger than the other set temperature display. Skin temperature can be converted from Celsius to Fahrenheit by the push of a button. The spacious baby bed incorporates easy drop down sides for maximum access to the baby.

The control panel is also the heart for a completely integrated alarm system with both audible and visual indicators in the  event of
• Probe fail                         • Skin High                         • Skin Low
• Power Fail                       • Heater Fail

Manual Mode
Facility of converting the warmer from servo mode to manual mode for non-stop working of the unit.

Heater Assembly
The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures.

Castors
The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors (Optional)

Baby Bed
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing.

Technical Specification

Highlight of the product
The unit is designed in such a way that the main control system can be swivelled to the other side for access from all the four sides to the patient in critical condition. Option: weighing scale