Our variety is that which is configured with AC as well as DC power source for the ease of operation. We are prime Transport Incubator Manufacturer and Exporter sited in Uttar Pradesh, India. Its easy access, compact size, easy mobility and alarm system make it different from other’s one. Approach us, for obtaining Transport Incubator at feasible prices. Rely on us for timely deliveries.
Control Panel : The controller features a display that is easy to read at any angle during transport. Display for air and skin temperature help you maintain, control and provide essential information about the infant's thermal support. Microprocessor controlled system with air and skin modes of operation. Display both temperatures i.e. Air/ Skin temp along with set temp. Soft touch operation with digital display and extensive alarms.
- Skin temp low/ high
- Probe failure
- Low battery
- Power failure
- System failure
- In cae of high temperature i.e. Above 38 ºC, heater automatically cuts off thus ensuring baby's safety. Can be used on manual mode as well.
Collapsible Stainless Steel Stand : With 2/4 no. Gas springs for ambulance and in hospital transport purpose. Gas spring system allow the stand to collapse when the lever is pulled and trolley is pressed from both the sides.
Performance Characteristics :
- Temperature set range - 32oC - 39oC
- Temp variability - 1.0 oC
- Temp uniformity - 1.0 oC
- Air filter - Removes airborne particles & dust
Easy Access : Quick and easy access through the side access door and front port holes. The side door folds down and the matteress retracts out from the hood to access for emergency procedures. The door and tubing ports offer ventilator tubing support Infant restraint strap attached to the baby bed.
Power Source :
- Transport incubator operates on AC or DC power using AC when available or switching ot its intenal battery when necessary.
- Battey ; the batteries used inthe system are 12 volt 18ah. Sealed maintenance free VRLA Batteries.
- Chare Time - 8-10 hrs. Per battery from full discharge.
- Hood options - Standard single wall / double wall hood (on demand).
- Chassis Body - Plastic (Fibre) to shock proof the system
Standard Features :
- Single wall hood
- Skin temperature probe / Air temp. Probe
- 2 access doors
- 1 baby belt
- Collapsible trolley
- Examination lamp
- 2 Disposable infant restraint straps
- 1 iris port
- 6 tubing ports
- Accessory shelf
- Suction, Oxygen cylinder, pressure regulatory assembly, Flow Meter, Remote controlled movement of the Trolley
Control Display :
- Battey condition status - Single led indication of low battery condition on the side panel
- Power mode - Illuminates AC, DC or external DC
- Air/ Baby temp oC - Displays incubator air temp / baby temperature
Dimensions (Approx.) :
- Height without hood - 39"
- In collapsible stand mode - 29"
- height with hood - 49"
- Width - 23"
- Length - 53"
- Baby bed - 20x11"
- Weight - 75kg
- Backup - 60-90mns
- Size of Castors - 5" PU
- Sealed maintenance free battery - VRLA Batteries
- Charge time - 10hrs. (Approx)