Infant Warmers

• Allows conversion from servo mode to manual mode for uninterrupted operation

• In manual mode, heat output is locked at 50% for added infant protection

• Located above the center of the support structure

• Consists of a radiant heater and reflector

• Includes an inbuilt LED examination lamp for assessing infant skin color

• Heater head is swivelable to either direction for flexible positioning

• Features a spacious design

• Equipped with easy drop-down side glasses for maximum access to the patient

• Fitted with 4″ high-quality castors, front two with brakes for stability

• Antistatic castors available as an option for enhanced safety

• Height: 1920 mm

• Length: 890 mm

• Width: 860 mm

• Power Supply: 220V / 50 Hz

• Heater Power: 650 Watts

• Fuse: 5 Amp

• Includes a slide-out drawer system for storing medical consumables and accessories

DESCRIPTION

Control Panel
The TianaTm– DX(E) Infant Radiant Warmer comes with automatic manual and baby (Servo) modes.

In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:

• High Temp./ Low Temp. 
• Power Failure
• System Fail
• Timer
• Probe Failure
• Heater fail /ON (Optional) only visual alarm provided

Air Mode (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed
The spacious oval baby bed incorporates easy drop down/fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed fortaking X-ray of the baby without disturbing

The First Breath
The Tiana – DX(E) Infant Radiant Warmer combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed.

Castors
The system is fitted with 4″ high quality castors having brakes in front 2 castors. Optional : Antistatic castors

Tray
The unit comes Two trays below baby bed for keeping consumables.

Phototherapy Unit (Optional)
The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit.

Additional Features
If needed the unit can be programmed by the user himself for any of the following features: (A) Count Up / down Timer. (B) Check baby Alarm. (C) Pre warming mode.

Product Description

Control Panel

The TianaTm– DX(E) Infant Radiant Warmer comes with automatic manual and baby (Servo) modes.

In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:

High Temp./ Low Temp. 

Power Failure

System Fail

Timer

Probe Failure

Heater fail /ON (Optional) only visual alarm provided

Air Mode (Optional)

The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event

Manual Mode

The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed

The spacious oval baby bed incorporates easy drop down/fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed fortaking X-ray of the baby without disturbing

The First Breath

The Tiana – DX(E) Infant Radiant Warmer combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed.

Castors

The system is fitted with 4″ high quality castors having brakes in front 2 castors. Optional : Antistatic castors

Tray

The unit comes Two trays below baby bed for keeping consumables.

Phototherapy Unit (Optional)

The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit.

Additional Features

If needed the unit can be programmed by the user himself for any of the following features: (A) Count Up / down Timer. (B) Check baby Alarm. (C) Pre warming mode.

Product Description

Manual Mode

• Facility of converting the warmer from servo mode to manual mode for non-stop working. The heat in the manual mode is locked at 50% to give more protection for the baby.

Heater Assembly

• The Heater assembly located above the center of the support structure consists of radiant heater and reflector with inbuilt halogen examination lamp for assessment of Infant color. The heater can be swivelled to either direction.

Baby Bed

• The attached spacious baby bed incorporates easy drop down glasses for maximum access to the patient.

Castors

• The system is fitted with 2″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.

Technical Specification

• Height1920mm
• Length890mm
• Width860mm
• Power Supply220V/50Hz
• Heater Power650 Watts
• Fuse5 Amp

OPTIONAL

• 2 Trays below the baby bed for keeping consumables.
• 2 Drawers fitted below the baby bed.

Product Description

Manual Mode

Facility of converting the warmer from servo mode to manual mode for non-stop working. The heat in the manual mode is locked at 50% to give more protection for the baby.

Heater Assembly

The Heater assembly located above the center of the support structure consists of radiant heater and reflector with inbuilt LED examination lamp for assessment of Infant color. The heater can be swiveled to either direction.

Baby Bed

The attached spacious baby bed incorporates easy drop down glasses for maximum access to the patient.

Castors

The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.

Dimensions (Approx.)

Height- 1920mm x Length- 890mm x Width- 860mm

Electrical Specifications

Power Supply: 220V/50Hz

Heater Power: 650 Watts

Fuse: 5 Amp

Storage

The unit comes fitted with one drawer system which slides out for keeping consumables.

Product Description

• Control Panel
• The TianaTM – S Infant Radiant Warmer  comes complete with automatic manual /baby (Servo)/Air modes. In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of :
• • High Temp./ Low Temp.  •  System Fail  • Probe Failure  •  Power Failure  • Timer  •  Heater fail / ON (Optional) only  visual alarm provided
• Heater Assembly
• The Parabolic heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either direction for taking X-ray and doing procedures.
• Air Mode (Optional)
• The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event.
• Manual Mode
•  The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.
• Baby Bed
• The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.
• Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing.
• Additional Features
• If needed the unit can be programmed by the user itself for any of the following features:
• (a) Count Up / down Timer.
• (b) Check baby Alarm.
• (c)  Pre warming mode.
• Castors
• The system is fitted with 4″ high quality castors having brakes in front 2 castors. Antistatic castors can be fitted as on option for further safety in lieu of the standard castors.
• Optional : The system comes with check baby alarm ( 1 – 120min.)

Technical Specification